#1088 Cherry JD Photos
#1088 Cherry JD Photos
Here’s a nice Cherry JD. It arrived at DBP with just one string but the bass is solid and should scrub up nicely.
The bass has Cherry wings, with a Mahogany, maple and purpleheart neck with an ipe board. As part of the refin’ I’ll be re-shaping the bass a little as well as adding a new pick-up, which will mean a wee trim of the fingerboard too.
Work to be done:
Sand fingerboard to 800 grit and polish
Sand body to 400 grit
Sand/shape neck to 400 grit
Shield cavities
Fabricate cavity cover
Seal wood
Apply Tru-Oil
Sand-back and polish
Fit string thro’ ferrules
Redo wiring harness add tone control
Fabricate nut and bridge
Refit hardware
Final set up
Work Completed:
Strip bass of hardware
Remove lacquer
Shape/sand body to 80 grit
Re-rout for new pick-up
Shape/sand body to 150 grit
Shape/sand neck to 220 grit
Sand of fretboard 220 grit
Filled holes/gaps as required.
Notes: